企业官网建设流程全解析

一、安装Hyper-V参考链接安装Windows子系统wsl2-Ubuntu注意只用看第一部分后面有问题二、下载ubuntu先尝试在powershell管理员里直接下载大概率下不了但可以装好WSLwsl --install -d Ubuntu-22.04然后设置WSL2为默认版本wsl --set-default-version 2清华源链接Index of /ubuntu-releases/22.04/ | 清华大学开源软件镜像站 | Tsinghua Open Source Mirror下载红框圈出的部分直接点击即可安装。设置用户名和密码。密码不会显示出来要自己记住。安装好后更新版本sudo apt update sudo apt upgrade -ypowershell中输入指令可看到装好了Ubuntuwsl -l -v可在ubuntu里输入如下指令检查是否安装好了lsb_release -a uname -r nvidia-smi这里也提供别人的思路应该也是OK的https://blog.csdn.net/q02132/article/details/157326450?fromshareblogdetailsharetypeblogdetailsharerId157326450sharereferPCsharesourceUID196129582sharefromfrom_link三、ubuntu的使用这部分也可参考链接https://blog.csdn.net/L0ve777/article/details/114550024?fromshareblogdetailsharetypeblogdetailsharerId114550024sharereferPCsharesourceUID196129582sharefromfrom_linkhttps://blog.csdn.net/L0ve777/article/details/114550024?fromshareblogdetailsharetypeblogdetailsharerId114550024sharereferPCsharesourceUID196129582sharefromfrom_linkhttps://blog.csdn.net/m0_49893790/article/details/136633580?fromshareblogdetailsharetypeblogdetailsharerId136633580sharereferPCsharesourceUID196129582sharefromfrom_linkhttps://blog.csdn.net/m0_49893790/article/details/136633580?fromshareblogdetailsharetypeblogdetailsharerId136633580sharereferPCsharesourceUID196129582sharefromfrom_link1、开启方式关闭直接叉掉即可2、安装Miniconda在ubuntu中安装代码如下# 1. 下载官方Miniconda wget https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh # 2. 安装 bash Miniconda3-latest-Linux-x86_64.sh # 3. 生效配置关键 source ~/.bashrc # 4. 此时出现(base)查看版本 conda --version一路回车或yes默认路径为/home/ubuntu2204/miniconda33、更换清华源在(base)环境下替换为清华源在ubuntu终端输入# 1. 清空所有现有源彻底移除Anaconda官方源 conda config --remove-key channels # 2. 添加清华源优先级从高到低 conda config --add channels https://mirrors.tuna.tsinghua.edu.cn/anaconda/pkgs/free/ conda config --add channels https://mirrors.tuna.tsinghua.edu.cn/anaconda/pkgs/main/ # 3. 开启源地址显示方便后续排查问题 conda config --set show_channel_urls yes验证源是否换成功输入conda config --show-sources输出如下注意此时有三个源直接建环境会默认使用官方源这里把官方源remove掉# 1. 删除miniconda3目录下的默认配置 rm ~/miniconda3/.condarc # 2. 删除anaconda认证文件避免冲突 rm ~/miniconda3/condarc.d/anaconda-auth.yml对于存放的源也可以手动编辑输入vim ~/.condarc打开vim编辑器可修改为如下按i启动编辑按esc退出编辑按:wq保存show_channel_urls: true channels: - https://mirrors.tuna.tsinghua.edu.cn/anaconda/pkgs/main/ - https://mirrors.tuna.tsinghua.edu.cn/anaconda/pkgs/free/ - https://mirrors.tuna.tsinghua.edu.cn/anaconda/cloud/conda-forge - defaults auto_activate: true如果想默认进入base可以conda config --set auto_activate_base true # 关闭设置为false即可 # 退出base使用conda deactivate # 进入base使用conda activate base补充pip换源https://blog.csdn.net/m0_49893790/article/details/136633580?fromshareblogdetailsharetypeblogdetailsharerId136633580sharereferPCsharesourceUID196129582sharefromfrom_linkhttps://blog.csdn.net/m0_49893790/article/details/136633580?fromshareblogdetailsharetypeblogdetailsharerId136633580sharereferPCsharesourceUID196129582sharefromfrom_link4、创建python环境# 1. 创建官方源Conda环境Python3.9默认清华源 conda create -n cusignal_v128 python3.9 -y # 2. 激活竞赛专用环境 conda activate cusignal_v128